Lumax LX-1704 Silver Galvanized Funnel with 12" Flexible Pipe with Screen. Built with Heavy Duty Galvanized Steel Construction. Ideal for Transmission Fluid

Useful

This is a decent quality funnel. It works well, doesn't leak, and the tube holds position relatively well. When I got it the tube was VERY stiff, but I worked it back and forth a bit and now it's perfectly flexible in any direction. My only issue is that the OD of the spout end is too big at 0.7 inches. So I had to modify it with a smaller diameter brass tube and some JB Weld epoxy putty. I can't count the size against the funnel because otherwise it's of good quality and the spout size only matters to my own specific purpose.

I have a Subaru Forester, that runs on unleaded gas. Nothing unusual. I bought this funnel to fit into the spout where you normally put gas in at the pump, and stay upright. However, the only way I could get the funnel to get past the "unleaded gasoline inlet restrictor" was to remove the thing that was crimped on to the end of the flexible tube of the funnel. After that was removed, the flexible filler tube went down into my car's gasoline filler neck and the funnel stayed upright so I could pour gas from a container into the car's tank. The funnel is great now!

I bought this for a kubota tractor where they put the hydro oil filler in an extremely inconvenient spot. In the past I had used a combination of funnels and gas can nozzles to reach it. This thing is amazing and I can imagine I will use it for other purposes, like my jeep which has an oil cap directly under my air intake, etc.

Well made. Would buy again.

This funnel is amazing 100% buy it, at northern tool it’s $23

I purchased this specifically to put gas in cars from my jerry cans and the tip of the funnel is too big fit to fit into the fuel filler neck! The tip is not even perfectly round and measures 5/8" O.D. at the narrowest and 11/16" O.D. at the widest. I ended up putting a plastic funnel that fits into fuel filler pipe (i.e. "neck") and then put this metal funnel inside the plastic funnel while my wife held the metal funnel as I could not get it to wedge inside the plastic funnel. Should have sent this back from day one.

This funnel is perfect for filling the transmission fluid in a 2d Gen Honda Ridgeline. The pour tip fits in the dip stick hole perfectly and is even ovoid so air escapes the filler tube with no burping happens. Highly recommend.