3 in 1 Non-Slip Wooden Plyo Box Plyometric Box Jumping Exercise, Multiple Sizes

Happy I bought this product, it is of good quality and not overly expensive. I weigh about 205/210 and it supports me with no wobble or movement. It has weight to it and the screws provided are of good quality. Assembly was very straight forward. I recommend using a drill or impact to install the screws as they are a tight fit and will wear your forearms down if using a screw driver. I will definitely be purchasing the bigger one next. I highly recommend this product.

Why did you pick this product vs others?:Took a while to build but it was worth it. Very strong and stable box. I have used it for about 6 months with no issues.

Overall it is a good product. It is sturdy and is fairly simple to put together.It's a great value, I could definitely build this in a 3-5 hours but the with the quality of plywood that it is made of and the machine cut joinery it wouldn't be worth it in my opinion and may actually be cheaper than just the materials to buy this pre built. The plywood itself is actually fairly high quality and measures in 11/16" thick, not sure what that is in millimeters. The internal side of the plywood appears to be melamine, so you couldn't really glue it together, and the outside is a hard textured material.You will need at the very least a #2 phillips (its actually a pozidrive but phillips will work) but unless you want some killer forearm pump I would recommend using a drill on a low-ish torque setting to assemble it but I would avoid using an impact driver as the cheap screws that hold the sides together are very brittle, the screws are not recessed into the plywood and when I attempted to drive one in flush the head sheered off.4/5, will probably last me a lifetime

Pretty nice box. I could see this being slightly difficult to assemble. I used 5 wood clamps to hold it together while I glued and screwed everything. Pay attention to the instructions, the center brace uses the small wood screws in the center and on the 2 sides. It would be nice if the 3 small wood screws were packaged separately from the large screws.

I need to practice Wall Sits and Sit and stand exercises. I couldn’t find anything around my house safe enough to practice these physical therapy exercises, so I took some measurements and this box works perfectly. I can also use the box for decline push-ups at the 16” level and for incline pushups at the 20” or 24” level. With that said, as for Workout effectiveness, it’s great and safe for what I need it for, and the design is good. Although I use the box up against the wall, the box doesn’t slide around because of the non-skid surface. The box isn’t too heavy to move around and it has cut outs as handles. I’ve only had it for a short while but it seems easy to clean. The price I thought was reasonable compared to other brands. For me it was easy to assemble and the size is perfect for what I’m using it for, I’m definitely not using it as a jump box or step up box as advertised. The Workout effectiveness is a 10. At the 20” height, if I lift myself up about an inch off the box, my knees are at a 90 degree angle which is perfect for wall sit exercise. At the 24” height I can practice the sit and stand exercise while trying not to use my hands to stand up. All and all, I think it was a good investment in my health.

My official review is a 3.5 but there are no half stars. I agree with what others are saying about the wonky assembly but this is one of the cheapest on the market, so I guess you get what you pay for. The first 3 screws don't have pilot holes so it makes it difficult to get them flush. You definitely cannot use the "screwdriver" they provide and even a cheap drill will not do the trick. Once I started drilling the outside pieces closed, I was able to go back to the original screws and get them to close (after I updated my drill). Then, you have to be careful because you can bust the wood around the screws if you drill too hard, like you had to with the beginning screws. Once you start drilling the pieces together, you have to circle back and make sure all the screws are in so that you don't have any gaps in the sides. The screws look blown out once you get them in, so hopefully I don't have to replace them.I will say that it seems stable to step on. I did not try to jump on it but I felt stable and comfortable stepping which is mainly what I'll use it for. I am unsure about durability and longevity because the pieces were chipping during the assembly.

Very sturdy product, my clients love it. Only negative is that you better have a power screwdriver.Jason Lonczak@officialnythor