One For All Contour 4 universal remote control TV - control of 4 devices - TV/ Smart TV set top box DVD Blu-ray and audio devices - guaranteed to work with all manufacturer brands - URC1240, Black

This item works perfectly with virginmedia v6 tv360 boxesTo setup,Power on tv360 boxOn remote:press satHold setup until power button blinks twiceNow type in 1582Power button will blink twiceNow press power buttonTv360 box will go into standbyNow press setup once to store settingsHope this helps someone.

Great service and product

this product works fine managed to pair 3 units to the one remote

This cost me £11. It's great. Will control Sky Q, my LG TV, Apple TV box and Yamaha amp. It will learn remotes it doesn't have in its database. You can program macros to perform a series of tasks with one key press. You can swap buttons around if you don't like the default mappings.One For all have been in this game for years and it shows. A very mature product.My only criticism is that the supplied manual doesn't include instructions for macro programming. The website FAQ's are very helpful tho', but to save you the trouble...How can I set up a macro on my Contour remote?You can program any key on your OFA remote (except SETUP) to send multiple commands on a single press –a Macro. This can be useful for controlling multiple devices to put them in a certain state – for instance you could put your TV on HDMI 1 and press Play on the Blu-ray player to start watching a movie. A key programmed with a Macro will send the same Macro regardless of the device mode.To use the Macro feature, please follow the instructions below:1 Press and hold the SETUP key until the light blinks twice.2 Enter the code 995.3 Press the relevant key where the Macro will be stored.4 Now select the device you want the first function of the Macro to come from, for example TV.5 Enter the sequence of keys that you would like to be issued.6 Press and hold the SETUP key to store the Macro. The light will blink twice to confirm.Additional Information:• Remember to press the keys in the same order you would using your original remotes – so if you pressed AV on the TV remote and then Play on the Blu-ray remote to watch a movie, do it in the same order on the One For All remote. • If the LED shows a long blink when you press a key in steps 4 or 5, you have entered too many keys, please try again.How can I delete a macro on my Contour remote?In order to delete a macro, please follow the instructions below:1 Hold the Setup key down until the light blinks twice.2 Press 995, the light should blink twice.3 Press the key you assigned the Macro to.4 Hold the Setup key down to delete the Macro, the light will blink twice.

Load of rubbish. Doesn’t connect to my Blu-Ray. One for All, my ass

Can’t believe how good this remote is. The code for my giga blue receiver did not work I suspect because my receivers the latest and greatest. So I did a code search and it found the right code very quickly. All but three keys worked immediately, so I only had to teach this remote three keys. It also controls my Sony Bravia for which the first code on the list worked. All in all a brilliant purchase.

It does control the Virgin box, can look at the guide, etc but does not control the volume. As it says it can control about 4 different things I tried to connect it to my tv as well as the Virgin box hoping that might work the volume with no success. Better than nothing but very disappointed with the Virgin update which now only allows for 1 controller. This one is better than nothing.

I have an old Android TV box, the original remote was old so I wanted a replacement. I could not find the code so I used the learning copy function. This was VERY helpful and maybe easier than looking for a code. If you have a working remote place this remote in front of it and one by one it can copy and learn / memorise all the buttons. I had to look online for the full instructions which are below:Learning (copy)Your One For All remote control can learn any function from any other workingremote control. To do this, firstly make sure you have all your original remotecontrols to hand, and that they have working batteries in. To learn functions,the original remote should be approximately 3cm from the OFA remote, poin-ting towards it as shown below:Learning Copy1. Select the corresponding device e.g. TV2. Press and hold down the SETUP key until the red LED underneath thePOWER key blinks twice (the red LED will blink once then twice)3. Press 9 754. Press and release the key you want to learn a function onto (for examplethe TV Power key) - The red LED will blink continuously5. Press and release the corresponding key on the original remote,for example Power.6. The red LED will blink twice to indicate the key has been learned correctly7. Repeat steps 4 and 5 for each key you want to learn - remember you canlearn from multiple remotes, but only one function per key8. When you learned all the functions you require, press and hold the SETUPkey until the red LED blinks twice.If the red LED shows one long blink at step 6, the function was not learnedcorrectly, please try again from step 4.If you find one or more keys don't work properly after set up, youcan re-enter the learning mode at any time by repeating the procedurefrom step 1How to delete a learned function to obtain the original function?1. Select the corresponding device mode (e.g. TV).2. Press and hold down the SETUP key until the red LED underneaththe POWER key blinks twice (the red LED will blink once then twice).3. Press 9 7 6.4. Press the key to be deleted (e.g.red key) twice.